Garden hose holder
1 h 24 min1 part
Garden tool holder for three handles
3D printing1 partBeginner-friendlyNo supports
A rail with three clips that keeps rakes, hoes, spades or brooms tidy on the shed or garage wall. Each clip takes handles of about 27 to 30 mm, which snap in through a 26 mm opening, and there are 30 mm between the clips. The rail sits 15 mm from the wall, so the handles hang freely, and is fixed with two 4 mm screws. At 197 × 44 × 25 mm it fits a 220 mm print bed; print it in PETG.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 197.1 × 44.17 × 25 mm
- Print time
- ≈ 1 h 17 min
- Filament
- ≈ 35 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 197.1 mm long, 44.2 mm deep, 25 mm high
- Holders: 3 for 30 mm
- Opening to clip in: 26.1 mm
- Distance from wall: 15 mm
- 2 holes for screws up to 4 mm, 185.1 mm apart
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Garden hose holder
Garden tool hook
1 h 1 min1 part
S-hook for hanging baskets
24 min1 part
Holder for 16 mm drip irrigation pipe
9 min1 part
Something wrong with this model? Report a problem