Key tag “Home”
4 min2 parts
E-reader stand for reading hands-free
3D printing1 partBeginner-friendlyNo supports
A compact stand that holds an e-reader or a small tablet at 70°, so you can read at the table, at breakfast or while eating without holding it. Devices up to 10 mm thick with a cover fit into the slot, and the 90 mm backrest supports them well. Only 60 mm wide and 57 mm deep, it also fits on a bedside table. It prints standing up without supports.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 60 × 57.08 × 90 mm
- Print time
- ≈ 1 h 37 min
- Filament
- ≈ 39 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. With PLA, 15 % infill and 3 walls (perimeters) it is sturdy enough; for a heavy tablet use 4 walls.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Stand: 60 mm wide, 57.1 mm deep, 90 mm high
- For devices up to 10 mm thick
- Angle: 70°
- Front lip: 8 mm
- Without cable opening
This model comes from the “Phone and tablet stand” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Key tag “Home”
Luggage tag
7 min2 parts
Weekly pill box with 7 compartments
1 h 28 min2 parts
Coin box with 4 compartments
1 h 37 min2 parts
Something wrong with this model? Report a problem