Brush holder for 8 brushes
1 h 9 min1 part
Rack for dropper paint bottles
3D printing1 partBeginner-friendlyNo supports
A rack for six dropper bottles of miniature paint, to stick on the wall above your painting desk or on the side of a shelf. Each ring takes a bottle up to 26 mm across, like the usual 17 ml dropper bottles – measure yours first. The bottle stands on a floor with a 10.5 mm hole, through which you can push it up again. It is 193.2 mm long, 31.3 mm deep and 30 mm high; print several and sort your paints by colour.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 193.16 × 31.26 × 30 mm
- Print time
- ≈ 2 h 4 min
- Filament
- ≈ 52 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 193.2 mm long, 31.3 mm deep, 30 mm high
- Holders: 6 for 26 mm
- Closed ring: slide in from above
- With base, drain hole 10.5 mm
- Distance from wall: 0 mm
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Brush holder for 8 brushes
Miniature box with 12 compartments
7 h 50 min2 parts
Paint pot organizer with 20 compartments
6 h 24 min1 part
Round bases 25 mm for miniatures, 10 pieces
25 min10 parts
Something wrong with this model? Report a problem