Rack for dropper paint bottles
2 h 4 min1 part
Brush holder for 8 brushes
3D printing1 partBeginner-friendlyNo supports
A slim holder for eight paint brushes, to stick on the wall or the side of a shelf at your painting desk. Each ring takes a handle up to 10 mm thick; the brushes stand upright with the bristles up, so the tips keep their shape. A small 4 mm hole in each floor lets rinsing water drain away. It is 134.6 mm long, only 15.1 mm deep and 30 mm high.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 134.6 × 15.1 × 30 mm
- Print time
- ≈ 1 h 9 min
- Filament
- ≈ 28 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 134.6 mm long, 15.1 mm deep, 30 mm high
- Holders: 8 for 10 mm
- Closed ring: slide in from above
- With base, drain hole 4 mm
- Distance from wall: 0 mm
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Rack for dropper paint bottles
Miniature box with 12 compartments
7 h 50 min2 parts
Paint pot organizer with 20 compartments
6 h 24 min1 part
Round bases 25 mm for miniatures, 10 pieces
25 min10 parts
Something wrong with this model? Report a problem