Drawer organizer for small parts, 6 × 4
6 h 20 min2 parts
Drawer organizer for small parts, 40 compartments
3D printing1 partBeginner-friendlyNo supports
Forty small compartments of about 23 × 22 mm in a tray 20 mm high, for a drawer of 200 × 120 mm inside. Resistors, LEDs, capacitors, small screws, nuts or jewellery findings each get their own compartment, so you no longer search through little bags. It prints in one piece; label the rows with masking tape, and for a different drawer, enter its inside measurements in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 199 × 119 × 20 mm
- Print time
- ≈ 3 h 57 min
- Filament
- ≈ 103 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print with the opening facing up, no supports needed. If the parts come out a little too wide, increase the clearance.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Organizer: 199 × 119 × 20 mm
- Each compartment inside: 23.53 × 22.36 × 18.8 mm
This model comes from the “Drawer organizer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Drawer organizer for small parts, 6 × 4
Shelf label “Screws”
3 min2 parts
Screw box with 6 compartments
3 h 28 min2 parts
Vacuum cleaner adapter 35 to 32 mm
39 min1 part
Something wrong with this model? Report a problem