Dust extraction adapter 100 to 35 mm
2 h 25 min1 part
Vacuum cleaner adapter 35 to 32 mm
3D printing1 partBeginner-friendlyNo supports
An adapter that connects a vacuum cleaner with a 35 mm tube to nozzles and accessories made for 32 mm. The tube or the hose handle slides into the socket and the 32 mm spigot goes into the brush or crevice tool – handy for keeping old attachments when you buy a new vacuum. Measure first: 35 mm is the outside of your tube, 32 mm the inside of the accessory's opening; for the other direction, swap the two ends in the generator.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 39.3 × 39.3 × 53.8 mm
- Print time
- ≈ 39 min
- Filament
- ≈ 13 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing as shown, no supports needed. With 3–4 walls (perimeters) it becomes watertight; a hose clamp holds hoses on the barbs.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 39.3 mm diameter, 53.8 mm high
- Bottom: socket for a pipe 35 mm outside, 25 mm deep
- Top: spigot for a pipe 32 mm inside, 25 mm long
- Narrowest opening: 27.7 mm
This model comes from the “Pipe adapter” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Dust extraction adapter 100 to 35 mm
Screw box with 6 compartments
3 h 28 min2 parts
Drawer organizer for small parts, 6 × 4
6 h 20 min2 parts
Shelf label “Screws”
3 min2 parts
Something wrong with this model? Report a problem