Screw box with 6 compartments
3 h 28 min2 parts
Shelf label “Screws”
3D printing2 partsBeginner-friendlyNo supports
A slim label with 8 mm raised letters on a 1.6 mm plate, for shelves, drawers and boxes in the workshop. A row of them shows at a glance where screws, nuts and drill bits are kept, and in the office it does the same for files and paper. Stick it on with double-sided tape or a dab of hot glue; for the next shelf, just change the word in the generator.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 44.43 × 14.27 × 2.8 mm
- Print time
- ≈ 3 min
- Filament
- ≈ 1.4 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 44.43 × 14.27 mm, 2.8 mm thick
- Second colour: change filament at 1.6 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Screw box with 6 compartments
Drawer organizer for small parts, 6 × 4
6 h 20 min2 parts
Vacuum cleaner adapter 35 to 32 mm
39 min1 part
Dust extraction adapter 100 to 35 mm
2 h 25 min1 part
Something wrong with this model? Report a problem