Box for parking coins and trolley tokens
41 min2 parts
Box for spare car fuses
3D printing2 partsBeginner-friendlyNo supports
A box with a lid for spare car fuses: eight compartments of 21.3 × 29.2 mm, 18.4 mm deep, keep the blade fuses sorted by amps, with room for spare bulbs too. Outside it is 93.2 × 63.2 mm and 27.8 mm high with the lid – small enough for the glove box. Write the amp ratings on the lid with a marker. In a hot car PLA goes soft, so print it in PETG.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 93.2 × 136.4 × 26.2 mm
- Print time
- ≈ 1 h 51 min
- Filament
- ≈ 49 g PETG
- Parts
- 2
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 93.2 × 63.2 × 26.2 mm
- Inside: 90 × 60 × 25 mm
- With lid: 27.8 mm high
- Each compartment: 21.3 × 29.2 mm, 18.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Box for parking coins and trolley tokens
Box for a bike repair kit
1 h 12 min2 parts
Bike helmet hook
52 min1 part
Car charging cable clip
8 min1 part
Something wrong with this model? Report a problem