Box for parking coins and trolley tokens
41 min2 parts
Box for a bike repair kit
3D printing2 partsBeginner-friendlyNo supports
A small box with a lid for the bike puncture repair kit: patches, glue, sandpaper and a spare valve stay together and dry. Inside it is 80 × 50 × 25 mm, outside 83.2 × 53.2 mm and 27.8 mm high with the lid on – it fits in a saddle bag or a jersey pocket. Print it in a bright colour so you find it quickly by the roadside.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 83.2 × 116.4 × 26.2 mm
- Print time
- ≈ 1 h 12 min
- Filament
- ≈ 31 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 83.2 × 53.2 × 26.2 mm
- Inside: 80 × 50 × 25 mm
- With lid: 27.8 mm high
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Box for parking coins and trolley tokens
Box for spare car fuses
1 h 51 min2 parts
Bike helmet hook
52 min1 part
Car charging cable clip
8 min1 part
Something wrong with this model? Report a problem