Box for spare car fuses
1 h 51 min2 parts
Box for parking coins and trolley tokens
3D printing2 partsBeginner-friendlyNo supports
A small box with a lid for the car: one compartment for coins for the parking meter, one for shopping trolley tokens. Each compartment is 29.2 × 30 mm and 13.4 mm deep – room for coins up to the largest euro coins. Outside it is 63.2 × 33.2 mm and 22.8 mm high with the lid, so it fits in the door pocket or the centre console. In a hot car PLA goes soft, so print it in PETG.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 63.2 × 76.4 × 21.2 mm
- Print time
- ≈ 41 min
- Filament
- ≈ 18 g PETG
- Parts
- 2
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 63.2 × 33.2 × 21.2 mm
- Inside: 60 × 30 × 20 mm
- With lid: 22.8 mm high
- Each compartment: 29.2 × 30 mm, 13.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Box for spare car fuses
Box for a bike repair kit
1 h 12 min2 parts
Bike helmet hook
52 min1 part
Car charging cable clip
8 min1 part
Something wrong with this model? Report a problem