Bike helmet hook
52 min1 part
M5 spacers for bikes
3D printing4 partsBeginner-friendlyNo supports
Four 10 mm spacers for M5 screws, the size of the eyelets on most bikes. They give mudguard stays or a bottle cage more room, for example past a disc brake. They are 10 mm across with a 5.5 mm hole and chamfered edges. Use longer screws accordingly and print them in PETG.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 10 × 10 × 10 mm
- Print time
- ≈ 7 min
- Filament
- ≈ 2.4 g PETG
- Parts
- 4
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print standing upright as shown, no supports needed. For washers under 1 mm use a layer height of 0.1–0.2 mm. The STL holds all pieces; in the 3MF each piece is its own object.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside 10 mm, hole 5.5 mm, 10 mm high
- Wall: 2.25 mm
- Pieces: 4
This model comes from the “Spacer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Bike helmet hook
Car charging cable clip
8 min1 part
Dashcam cable clip
5 min1 part
Bike pump holder
19 min1 part
Something wrong with this model? Report a problem