Drawer insert for 3D printer tools

3D printing2 partsBeginner-friendlyNo supports

A drawer insert with six large compartments for the tools around your 3D printer: scraper, side cutters, tweezers, hex keys and glue stick. Each compartment is 97.7 × 97.7 mm and 38.8 mm deep; the insert fits a drawer with 300 × 200 mm inside and is 40 mm high. It comes in two parts that fit a 220 mm print bed and stand side by side in the drawer.

The file is made in your browser. We only count how often it is downloaded.

Size: 299 × 199 × 40 mm
Print time: ≈ 7 h 22 min
Filament: ≈ 197 g PLA
Parts: 2

Print settings

Material: PLA
Layer height: 0.2 mm
Infill: 15%
Walls: 2
Supports: none

Tip: Print with the opening facing up, no supports needed. If the parts come out a little too wide, increase the clearance.

Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.

Adjust it

Organizer: 299 × 199 × 40 mm
Each compartment inside: 97.67 × 97.7 × 38.8 mm
Split into 2 parts (2 × 1) so each fits the print bed. A1 goes front left. STL comes as a ZIP with one file per part.

This model comes from the “Drawer organizer” generator. Open it there with these settings and change any size you like.

Open in the generator