Glue stick holder for the 3D printer
52 min1 part
Spray bottle holder for the 3D printer
3D printing1 partBeginner-friendlyNo supports
A cup for the side of the 3D printer or the wall that holds the spray bottle of isopropyl alcohol for cleaning the print bed. It takes bottles up to 52 mm in diameter, which simply stand in the 45 mm high cup, and a hole in the base lets drips run off. The flat back sticks on with mounting tape. Measure your bottle first. 62 × 58 × 45 mm.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 61.92 × 58.42 × 45 mm
- Print time
- ≈ 1 h 9 min
- Filament
- ≈ 28 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 61.9 mm long, 58.4 mm deep, 45 mm high
- Holders: 1 for 52 mm
- Closed ring: slide in from above
- With base, drain hole 21 mm
- Distance from wall: 0 mm
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Glue stick holder for the 3D printer
Filament label “PLA”
4 min2 parts
Nozzle box with 8 compartments
57 min2 parts
Round tolerance test 10 mm
14 min2 parts
Something wrong with this model? Report a problem