Nozzle box with 8 compartments
57 min2 parts
Spare parts box for the 3D printer
3D printing2 partsBeginner-friendlyNo supports
A box with lid and twelve compartments for the small spare parts of your 3D printer: nozzles, heater cartridges, thermistors, screws and springs. Each compartment is 28.8 × 25.6 mm and 18.4 mm deep. Outside the box is 123.2 × 83.2 mm and 27.8 mm high with the lid, so it fits in a drawer next to the printer. Label the lid and you will find the right part quickly when something breaks.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 123.2 × 176.4 × 26.2 mm
- Print time
- ≈ 2 h 53 min
- Filament
- ≈ 77 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 123.2 × 83.2 × 26.2 mm
- Inside: 120 × 80 × 25 mm
- With lid: 27.8 mm high
- Each compartment: 28.8 × 25.6 mm, 18.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Nozzle box with 8 compartments
Filament label “PLA”
4 min2 parts
Glue stick holder for the 3D printer
52 min1 part
Spray bottle holder for the 3D printer
1 h 9 min1 part
Something wrong with this model? Report a problem