Vacuum cleaner adapter 35 to 32 mm
39 min1 part
Dust extraction adapter 100 to 35 mm
3D printing1 partBeginner-friendlyNo supports
An adapter that connects the 100 mm dust port of a woodworking machine to a 35 mm shop vacuum hose. The 40 mm deep socket slides over the port of a band saw, router table or small planer, and the 30 mm long spigot goes into the hose or its tool cuff. If your hose ends in a rigid tube instead, change the top end to a socket in the generator; a turn of tape around the port takes up any play.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 104.3 × 104.3 × 104.8 mm
- Print time
- ≈ 2 h 25 min
- Filament
- ≈ 53 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing as shown, no supports needed. With 3–4 walls (perimeters) it becomes watertight; a hose clamp holds hoses on the barbs.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 104.3 mm diameter, 104.8 mm high
- Bottom: socket for a pipe 100 mm outside, 40 mm deep
- Top: spigot for a pipe 35 mm inside, 30 mm long
- Narrowest opening: 30.7 mm
This model comes from the “Pipe adapter” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Vacuum cleaner adapter 35 to 32 mm
Screw box with 6 compartments
3 h 28 min2 parts
Drawer organizer for small parts, 6 × 4
6 h 20 min2 parts
Shelf label “Screws”
3 min2 parts
Something wrong with this model? Report a problem