S-hook for kitchen rails 16 mm
11 min1 part
Utensil holder for cooking spoons
3D printing1 partBeginner-friendlyNo supports
A tall, square holder for the kitchen counter, 11 × 11 cm and 15 cm high, with six grooves on each side. Wooden spoons, spatulas, whisks and the ladle stand upright and within reach next to the stove. The 4 mm thick floor makes it heavy at the bottom so it doesn't tip when you pull out a spoon. Inside it is 9.9 cm wide and 14.6 cm deep.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 110 × 110 × 150 mm
- Print time
- ≈ 7 h 26 min
- Filament
- ≈ 191 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print the pot standing upright as shown and the saucer flat, both without supports. For a watertight saucer use 3 walls (perimeters). PETG copes better with sun and water than PLA.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Pot: 110 mm at the top, 100 mm at the bottom, 150 mm high
- Inside: 99.4 mm at the top, 146 mm deep
- Holds about 1.22 l of soil
- 24 grooves
- No drainage hole
This model comes from the “Plant pot” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
S-hook for kitchen rails 16 mm
Pantry label “Flour”
6 min2 parts
Tea bag box with 2 compartments
5 h 34 min2 parts
Cutlery tray 300 × 480 mm
20 h 23 min4 parts
Something wrong with this model? Report a problem