Cutlery tray 300 × 480 mm
20 h 23 min4 parts
Tea bag box with 2 compartments
3D printing2 partsBeginner-friendlyNo supports
This box with lid keeps tea bags in their paper envelopes in two compartments, 166 × 80 × 78 mm inside. The envelopes stand upright like index cards: each compartment is a little over 80 mm wide, and the lid closes over envelopes up to about 70 mm tall. Use one compartment for black tea and one for herbal tea, and put the envelopes in with the name facing you, so you can flip through them.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 169.2 × 176.4 × 79.2 mm
- Print time
- ≈ 5 h 34 min
- Filament
- ≈ 142 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 169.2 × 83.2 × 79.2 mm
- Inside: 166 × 80 × 78 mm
- With lid: 80.8 mm high
- Each compartment: 82.2 × 80 mm, 71.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Cutlery tray 300 × 480 mm
Star cookie cutter 70 mm
17 min1 part
Small star cookie cutter 40 mm
11 min1 part
Heart cookie cutter 60 mm
13 min1 part
Something wrong with this model? Report a problem