Door sign “Do not disturb”
13 min2 parts
Toilet door sign
3D printing2 partsBeginner-friendlyNo supports
An oval toilet sign with 18 mm raised letters on a 3 mm plate that sticks to the door without screws. It shows guests the way at home, in a holiday flat, a small office or a café. Put double-sided mounting tape on the flat back; if you print it in two colours, dark letters on a light oval are easiest to read from a distance.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 99.79 × 33.35 × 4.2 mm
- Print time
- ≈ 14 min
- Filament
- ≈ 7.1 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 99.79 × 33.35 mm, 4.2 mm thick
- Second colour: change filament at 3 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Door sign “Do not disturb”
House number
37 min2 parts
Jewellery box with 6 compartments
2 h 34 min2 parts
Box for 10 AA batteries
2 h 32 min2 parts
Something wrong with this model? Report a problem