Toilet door sign
14 min2 parts
Door sign “Do not disturb”
3D printing2 partsBeginner-friendlyNo supports
A “Do not disturb” sign in two lines with 12 mm raised letters and a hole at the top for hanging. It goes on the door handle of a home office, guest room or bedroom whenever you need some quiet. Thread a cord or ribbon through the hole and tie a loop long enough to slip easily over the handle.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 62.4 × 46.28 × 3.6 mm
- Print time
- ≈ 13 min
- Filament
- ≈ 6.3 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 62.4 × 46.28 mm, 3.6 mm thick
- Second colour: change filament at 2.4 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Toilet door sign
House number
37 min2 parts
Jewellery box with 6 compartments
2 h 34 min2 parts
Box for 10 AA batteries
2 h 32 min2 parts
Something wrong with this model? Report a problem