Door sign “Do not disturb”
13 min2 parts
House number
3D printing2 partsBeginner-friendlyNo supports
A house number with 60 mm raised digits on a 5 mm plate that follows their outline with an 8 mm margin. It belongs next to the front door, on the letterbox or the garden gate; outdoors, PETG or, in full sun, ASA lasts longer than PLA, which softens in summer heat. Type your own number in the generator – the wide margin keeps the outline in one piece – and fix it with weatherproof mounting tape or construction adhesive.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 96.23 × 77 × 6.2 mm
- Print time
- ≈ 37 min
- Filament
- ≈ 20 g PETG
- Parts
- 2
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 96.23 × 77 mm, 6.2 mm thick
- Second colour: change filament at 5 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Door sign “Do not disturb”
Toilet door sign
14 min2 parts
Jewellery box with 6 compartments
2 h 34 min2 parts
Box for 10 AA batteries
2 h 32 min2 parts
Something wrong with this model? Report a problem