Flower pot 10 cm with saucer
3 h 36 min2 parts
Square herb pot with saucer
3D printing2 partsBeginner-friendlyNo supports
A square pot for herbs, 10 × 10 cm at the top and 10 cm high, with a square saucer. Square pots stand flush in a row on the kitchen windowsill and use the space better than round ones. It holds about 0.72 l of soil – plenty for parsley, chives or mint – and drains through a 10 mm hole onto the ribs of the saucer.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 213.2 × 103.2 × 100 mm
- Print time
- ≈ 5 h 15 min
- Filament
- ≈ 132 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print the pot standing upright as shown and the saucer flat, both without supports. For a watertight saucer use 3 walls (perimeters). PETG copes better with sun and water than PLA.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Pot: 100 mm at the top, 90 mm at the bottom, 100 mm high
- Inside: 96 mm at the top, 98 mm deep
- Holds about 0.72 l of soil
- Drainage hole: 10 mm
- Saucer: 103.2 mm wide, 12 mm high
This model comes from the “Plant pot” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Flower pot 10 cm with saucer
Grooved flower pot with saucer
4 h 38 min2 parts
Twisted hexagonal flower pot
3 h 22 min2 parts
Mini pot for succulents
1 h 19 min2 parts
Something wrong with this model? Report a problem