Flower pot 10 cm with saucer
3 h 36 min2 parts
Grooved flower pot with saucer
3D printing2 partsBeginner-friendlyNo supports
A flower pot with 32 vertical grooves all around, 10.5 cm wide at the top and 10 cm high, with a saucer. The grooves catch the light and make even a simple green plant look special on the windowsill. It holds about 0.49 l of soil, has a 10 mm drainage hole, and the saucer keeps the pot above the water on six ribs.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 212.2 × 105 × 100 mm
- Print time
- ≈ 4 h 38 min
- Filament
- ≈ 118 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print the pot standing upright as shown and the saucer flat, both without supports. For a watertight saucer use 3 walls (perimeters). PETG copes better with sun and water than PLA.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Pot: 105 mm at the top, 84 mm at the bottom, 100 mm high
- Inside: 94.7 mm at the top, 98 mm deep
- Holds about 0.49 l of soil
- 32 grooves
- Drainage hole: 10 mm
- Saucer: 97.2 mm wide, 14 mm high
This model comes from the “Plant pot” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Flower pot 10 cm with saucer
Twisted hexagonal flower pot
3 h 22 min2 parts
Mini pot for succulents
1 h 19 min2 parts
Hexagonal cactus pot with grooves
2 h 5 min2 parts
Something wrong with this model? Report a problem