Door sign “Do not disturb”
13 min2 parts
Sign “Please take your shoes off”
3D printing2 partsBeginner-friendlyNo supports
A friendly sign in two lines, “Please take your shoes off”, with 12 mm raised letters on a 3 mm plate. By the front door, in the hallway or at the entrance to a carpeted room, it politely asks guests to leave their shoes outside, which keeps dirt and wet off the floor. Stick it at eye level with double-sided tape; print the letters in a second colour and change the wording in the generator if you like.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 124.31 × 46.21 × 4.2 mm
- Print time
- ≈ 29 min
- Filament
- ≈ 15 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 124.31 × 46.21 mm, 4.2 mm thick
- Second colour: change filament at 3 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Door sign “Do not disturb”
Toilet door sign
14 min2 parts
House number
37 min2 parts
Mailbox sign “No junk mail”
10 min2 parts
Something wrong with this model? Report a problem