Round bases 25 mm for miniatures, 10 pieces
25 min10 parts
Hexagonal bases 25 mm, 10 pieces
3D printing10 partsBeginner-friendlyNo supports
Ten hexagonal bases, 25 mm across the flats and 3 mm high, for games played on a hex grid and for figures that should line up neatly side by side. Use them as stands for miniatures, as markers for heroes and objectives, or as tiles for building small terrain. Measure a field of your game board across the flats before printing and enter the value in the generator, so the bases fill the fields exactly.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 28.87 × 25 × 3 mm
- Print time
- ≈ 28 min
- Filament
- ≈ 14 g PLA
- Parts
- 10
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print standing upright as shown, no supports needed. For washers under 1 mm use a layer height of 0.1–0.2 mm. The STL holds all pieces; in the 3MF each piece is its own object.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside 25 mm, no hole, 3 mm high
- Hex: 25 mm across flats, 28.87 mm across corners
- Pieces: 10
This model comes from the “Spacer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Round bases 25 mm for miniatures, 10 pieces
Round bases 32 mm for miniatures, 6 pieces
27 min6 parts
Round bases 40 mm for miniatures, 4 pieces
27 min4 parts
Painting handle for miniatures
37 min1 part
Something wrong with this model? Report a problem