Round bases 25 mm for miniatures, 10 pieces
25 min10 parts
Painting handle for miniatures
3D printing1 partBeginner-friendlyNo supports
A simple painting handle, 32 mm across and 60 mm tall, that you hold instead of the miniature itself while painting. Fix the figure on top with a dab of poster putty or a drop of PVA glue, and your fingers stay off fresh paint while you can turn the model in any direction. The round shape sits comfortably in the hand; for 40 mm bases, set a larger diameter in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 32 × 32 × 60 mm
- Print time
- ≈ 37 min
- Filament
- ≈ 16 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print standing upright as shown, no supports needed. For washers under 1 mm use a layer height of 0.1–0.2 mm. The STL holds all pieces; in the 3MF each piece is its own object.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside 32 mm, no hole, 60 mm high
This model comes from the “Spacer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Round bases 25 mm for miniatures, 10 pieces
Round bases 32 mm for miniatures, 6 pieces
27 min6 parts
Round bases 40 mm for miniatures, 4 pieces
27 min4 parts
Hexagonal bases 25 mm, 10 pieces
28 min10 parts
Something wrong with this model? Report a problem