Round coaster with rings
41 min2 parts
Pet bowl mat with rim
3D printing2 partsBeginner-friendlyNo supports
A mat for a cat or small dog bowl that catches spilled water and food, so the floor stays clean. The bowl stands on a honeycomb pattern, and the 4 mm rim keeps puddles on the mat. It is 200 mm across the flat sides and suits bowls up to about 18 cm. It needs a print bed of at least 200 × 200 mm; print it in PETG and rinse it now and then.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 200 × 200 × 6.4 mm
- Print time
- ≈ 2 h 55 min
- Filament
- ≈ 92 g PETG
- Parts
- 2
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. For two colours, change filament at the height shown (in the slicer: colour change at that layer), or load the 3MF and give the pattern its own colour. PLA works well; wipe the coaster with a damp cloth – it is not for the dishwasher.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 200 × 200 mm, 6.4 mm high
- Base: 2.4 mm
- Rim: 4 mm wide, 4 mm high, 192 mm inside
- Second colour: change filament at 2.4 mm height
This model comes from the “Coaster” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Round coaster with rings
Hexagonal honeycomb coaster
45 min2 parts
Square coaster with diagonal stripes
47 min2 parts
Octagonal coaster with dots
43 min2 parts
Something wrong with this model? Report a problem