Hexagonal honeycomb coaster
45 min2 parts
Round coaster with rings
3D printing2 partsBeginner-friendlyNo supports
A round coaster with raised rings for glasses and mugs. The glass stands on the rings, drips collect in the grooves in between, and a 2 mm rim keeps them on the coaster. It is 100 mm across and 4.4 mm thick. Print it in one colour, or change filament at 2.4 mm so the rings and the rim stand out in a second colour – a nice set for the table.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 100 × 100 × 4.4 mm
- Print time
- ≈ 41 min
- Filament
- ≈ 21 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. For two colours, change filament at the height shown (in the slicer: colour change at that layer), or load the 3MF and give the pattern its own colour. PLA works well; wipe the coaster with a damp cloth – it is not for the dishwasher.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 100 × 100 mm, 4.4 mm high
- Base: 2.4 mm
- Rim: 3 mm wide, 2 mm high, 94 mm inside
- Second colour: change filament at 2.4 mm height
This model comes from the “Coaster” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Hexagonal honeycomb coaster
Square coaster with diagonal stripes
47 min2 parts
Octagonal coaster with dots
43 min2 parts
Simple coaster with a rim
38 min2 parts
Something wrong with this model? Report a problem