Round coaster with rings
41 min2 parts
Square coaster with diagonal stripes
3D printing2 partsBeginner-friendlyNo supports
A square coaster with diagonal stripes that looks modern on any table. The glass stands on the 2 mm stripes, drips run into the grooves, and the rounded rim keeps them in. At 95 × 95 mm and 4.4 mm thick it suits glasses, cups and mugs. In two colours – change filament at 2.4 mm – the stripes really stand out.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 95 × 95 × 4.4 mm
- Print time
- ≈ 47 min
- Filament
- ≈ 24 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. For two colours, change filament at the height shown (in the slicer: colour change at that layer), or load the 3MF and give the pattern its own colour. PLA works well; wipe the coaster with a damp cloth – it is not for the dishwasher.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 95 × 95 mm, 4.4 mm high
- Base: 2.4 mm
- Rim: 3 mm wide, 2 mm high, 89 mm inside
- Second colour: change filament at 2.4 mm height
This model comes from the “Coaster” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Round coaster with rings
Hexagonal honeycomb coaster
45 min2 parts
Octagonal coaster with dots
43 min2 parts
Simple coaster with a rim
38 min2 parts
Something wrong with this model? Report a problem