Round coaster with rings
41 min2 parts
Hexagonal honeycomb coaster
3D printing2 partsBeginner-friendlyNo supports
A hexagonal coaster with a honeycomb pattern: the glass stands on the 2 mm walls of the cells, which catch drips, and the rim frames it all. It measures 114 × 100 mm and is 4.4 mm thick. Several of them fit together on the table like a honeycomb – print a few in yellow and black, or change filament at 2.4 mm for a two-coloured pattern.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 114.23 × 100 × 4.4 mm
- Print time
- ≈ 45 min
- Filament
- ≈ 23 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. For two colours, change filament at the height shown (in the slicer: colour change at that layer), or load the 3MF and give the pattern its own colour. PLA works well; wipe the coaster with a damp cloth – it is not for the dishwasher.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 114.2 × 100 mm, 4.4 mm high
- Base: 2.4 mm
- Rim: 3 mm wide, 2 mm high, 94 mm inside
- Second colour: change filament at 2.4 mm height
This model comes from the “Coaster” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Round coaster with rings
Square coaster with diagonal stripes
47 min2 parts
Octagonal coaster with dots
43 min2 parts
Simple coaster with a rim
38 min2 parts
Something wrong with this model? Report a problem