Door sign “Do not disturb”
13 min2 parts
Menu and table card holder
3D printing1 partBeginner-friendlyNo supports
A slim holder for menus, price lists or table cards – for a party, a wedding, a café or the market stall. It holds cards up to 2 mm thick at 75°, and at 110 mm wide it takes A6 cards upright. The 70 mm backrest keeps them steady, and at 33 mm deep it takes up little room on the table. It prints standing up without supports – print one for every table.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 110 × 32.53 × 70 mm
- Print time
- ≈ 1 h 53 min
- Filament
- ≈ 46 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. With PLA, 15 % infill and 3 walls (perimeters) it is sturdy enough; for a heavy tablet use 4 walls.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Stand: 110 mm wide, 32.5 mm deep, 70 mm high
- For devices up to 2 mm thick
- Angle: 75°
- Front lip: 6 mm
- Without cable opening
This model comes from the “Phone and tablet stand” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Door sign “Do not disturb”
Toilet door sign
14 min2 parts
House number
37 min2 parts
Mailbox sign “No junk mail”
10 min2 parts
Something wrong with this model? Report a problem