S-hook for kitchen rails 16 mm
11 min1 part
Laser-cut tea box 200 × 110 × 90 mm
Laser cutting6 partsBeginner-friendly
A closed tea box with finger joints, cut from six panels of 3 mm plywood and measuring 200 × 110 × 90 mm on the outside. Tea bags in their paper envelopes stand upright inside in two rows side by side, and with 84 mm of inner height the lid still closes over them. Glue the bottom and the four sides and leave the lid loose so it lifts straight off; if you like, engrave a name or a pattern on the lid in your laser software first.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 200 × 110 × 90 mm
- Parts
- 6
- Material thickness
- 3 mm
Cutting settings
- Material thickness
- 3 mm
- Kerf
- 0.1 mm – Adjust it to your laser in the generator.
Worked for others:
Tip: Open the SVG or DXF in your laser software (e.g. LightBurn or xTool Creative Space). Cut lines are red and 0.1 mm thin. Cut a test corner first: if the joints are loose, raise the kerf; if they are too tight, lower it. Glue with wood glue.
Adjust it
- Outside: 200 × 110 × 90 mm
- Inside: 194 × 104 × 84 mm
- 6 parts, together 405.1 × 300.1 mm
This model comes from the “Laser box with finger joints” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
S-hook for kitchen rails 16 mm
Pantry label “Flour”
6 min2 parts
Tea bag box with 2 compartments
5 h 34 min2 parts
Cutlery tray 300 × 480 mm
20 h 23 min4 parts
Something wrong with this model? Report a problem