Laser box 100 × 80 × 50 mm
Laser cutting6 parts
Laser-cut gift box 120 × 120 × 60 mm
Laser cutting6 partsBeginner-friendly
A square gift box with finger joints, cut from six panels of 3 mm plywood or MDF and measuring 120 × 120 × 60 mm on the outside. It holds a small present, homemade biscuits or a few candles, and the box itself is already part of the gift. Glue only the bottom and the sides so the lid comes off; before cutting, engrave a name, a date or a pattern on the lid in your laser software, and tie a ribbon around it to keep it shut.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 120 × 120 × 60 mm
- Parts
- 6
- Material thickness
- 3 mm
Cutting settings
- Material thickness
- 3 mm
- Kerf
- 0.1 mm – Adjust it to your laser in the generator.
Worked for others:
Tip: Open the SVG or DXF in your laser software (e.g. LightBurn or xTool Creative Space). Cut lines are red and 0.1 mm thin. Cut a test corner first: if the joints are loose, raise the kerf; if they are too tight, lower it. Glue with wood glue.
Adjust it
- Outside: 120 × 120 × 60 mm
- Inside: 114 × 114 × 54 mm
- 6 parts, together 245.1 × 250.1 mm
This model comes from the “Laser box with finger joints” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Laser box 100 × 80 × 50 mm
Laser box 200 × 150 × 100 mm
Laser cutting6 parts
Laser-cut tray 300 × 200 × 40 mm
Laser cutting5 parts
Laser-cut crate 400 × 300 × 250 mm
Laser cutting5 parts
Something wrong with this model? Report a problem