Laser box 200 × 150 × 100 mm
Laser cutting6 parts
Laser box 100 × 80 × 50 mm
Laser cutting6 partsBeginner-friendly
A closed box of six panels for 3 mm plywood or MDF, 100 × 80 × 50 mm on the outside – the classic first project for a laser cutter. The finger joints hold on their own; a little wood glue makes it permanent. If the fingers sit too loose or too tight, adjust the kerf to your laser in the generator.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 100 × 80 × 50 mm
- Parts
- 6
- Material thickness
- 3 mm
Cutting settings
- Material thickness
- 3 mm
- Kerf
- 0.1 mm – Adjust it to your laser in the generator.
Worked for others:
Tip: Open the SVG or DXF in your laser software (e.g. LightBurn or xTool Creative Space). Cut lines are red and 0.1 mm thin. Cut a test corner first: if the joints are loose, raise the kerf; if they are too tight, lower it. Glue with wood glue.
Adjust it
- Outside: 100 × 80 × 50 mm
- Inside: 94 × 74 × 44 mm
- 6 parts, together 205.1 × 190.1 mm
This model comes from the “Laser box with finger joints” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Laser box 200 × 150 × 100 mm
Laser-cut tray 300 × 200 × 40 mm
Laser cutting5 parts
Laser-cut crate 400 × 300 × 250 mm
Laser cutting5 parts
Screw box with 6 compartments
3 h 28 min2 parts
Something wrong with this model? Report a problem