Laser box 100 × 80 × 50 mm
Laser cutting6 parts
Laser-cut crate 400 × 300 × 250 mm
Laser cutting5 partsBeginner-friendly
A large open crate with 20 mm wide finger joints, cut from five panels of 6 mm plywood and measuring 400 × 300 × 250 mm on the outside. It takes toys, firewood, shoes or workshop offcuts, and the wide fingers suit the thick sheet. Each panel needs a work area of at least 400 × 300 mm, so cut them one at a time and check that the laser has gone right through the 6 mm before you take a panel out.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 400 × 300 × 250 mm
- Parts
- 5
- Material thickness
- 6 mm
Cutting settings
- Material thickness
- 6 mm
- Kerf
- 0.1 mm – Adjust it to your laser in the generator.
Worked for others:
Tip: Open the SVG or DXF in your laser software (e.g. LightBurn or xTool Creative Space). Cut lines are red and 0.1 mm thin. Cut a test corner first: if the joints are loose, raise the kerf; if they are too tight, lower it. Glue with wood glue.
Adjust it
- Outside: 400 × 300 × 250 mm
- Inside: 388 × 288 × 244 mm
- 5 parts, together 805.1 × 810.1 mm
This model comes from the “Laser box with finger joints” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Laser box 100 × 80 × 50 mm
Laser box 200 × 150 × 100 mm
Laser cutting6 parts
Laser-cut tray 300 × 200 × 40 mm
Laser cutting5 parts
Screw box with 6 compartments
3 h 28 min2 parts
Something wrong with this model? Report a problem