Laser box 100 × 80 × 50 mm
Laser cutting6 parts
Laser box 200 × 150 × 100 mm
Laser cutting6 partsBeginner-friendly
A large closed box with finger joints, cut from six panels of 4 mm plywood or MDF and measuring 200 × 150 × 100 mm on the outside. The thicker sheet makes it sturdier than a 3 mm box, good for tools, craft supplies, cables or card games on the shelf. Glue only the bottom and the four sides and leave the lid loose: it lifts straight off and drops back into the finger joints.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 200 × 150 × 100 mm
- Parts
- 6
- Material thickness
- 4 mm
Cutting settings
- Material thickness
- 4 mm
- Kerf
- 0.1 mm – Adjust it to your laser in the generator.
Tip: Open the SVG or DXF in your laser software (e.g. LightBurn or xTool Creative Space). Cut lines are red and 0.1 mm thin. Cut a test corner first: if the joints are loose, raise the kerf; if they are too tight, lower it. Glue with wood glue.
Adjust it
- Outside: 200 × 150 × 100 mm
- Inside: 192 × 142 × 92 mm
- 6 parts, together 405.1 × 360.1 mm
This model comes from the “Laser box with finger joints” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Laser box 100 × 80 × 50 mm
Laser-cut tray 300 × 200 × 40 mm
Laser cutting5 parts
Laser-cut crate 400 × 300 × 250 mm
Laser cutting5 parts
Screw box with 6 compartments
3 h 28 min2 parts
Something wrong with this model? Report a problem