Flower pot 10 cm with saucer
3 h 36 min2 parts
Large octagonal pot with grooves
3D printing1 partBeginner-friendlyNo supports
A large octagonal plant pot, 16 cm across the flats at the top and 14 cm high, with four grooves on each side and a gentle 30° twist. It holds about 1.9 l of soil – enough for a monstera cutting, a small olive tree or a bigger herb. With its 10 mm drainage hole it can stand on any saucer; without a saucer it fits on a 220 mm print bed.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 171.7 × 171.7 × 140 mm
- Print time
- ≈ 8 h 23 min
- Filament
- ≈ 216 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print the pot standing upright as shown and the saucer flat, both without supports. For a watertight saucer use 3 walls (perimeters). PETG copes better with sun and water than PLA.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Pot: 160 mm at the top, 130 mm at the bottom, 140 mm high
- Inside: 148.6 mm at the top, 138 mm deep
- Holds about 1.9 l of soil
- 32 grooves
- Twisted by 30°
- Drainage hole: 10 mm
This model comes from the “Plant pot” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Flower pot 10 cm with saucer
Grooved flower pot with saucer
4 h 38 min2 parts
Twisted hexagonal flower pot
3 h 22 min2 parts
Mini pot for succulents
1 h 19 min2 parts
Something wrong with this model? Report a problem