S-hook for kitchen rails 16 mm
11 min1 part
Hand blender holder for the kitchen wall
3D printing1 partBeginner-friendlyNo supports
A ring for the kitchen wall that holds a hand blender: slide the shaft through from above and the motor rests on the ring, ready to hand instead of in the drawer. It takes shafts up to 50 mm thick and sits 15 mm from the wall, so the blender hangs freely. Measure your blender first and fix the ring with two 4 mm screws. 82 × 73 × 20 mm.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 81.9 × 72.9 × 20 mm
- Print time
- ≈ 37 min
- Filament
- ≈ 16 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 81.9 mm long, 72.9 mm deep, 20 mm high
- Holders: 1 for 50 mm
- Closed ring: slide in from above
- Distance from wall: 15 mm
- 2 holes for screws up to 4 mm, 69.9 mm apart
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
S-hook for kitchen rails 16 mm
Pantry label “Flour”
6 min2 parts
Tea bag box with 2 compartments
5 h 34 min2 parts
Cutlery tray 300 × 480 mm
20 h 23 min4 parts
Something wrong with this model? Report a problem