Door sign “Do not disturb”
13 min2 parts
Fuse box label “Kitchen”
3D printing2 partsBeginner-friendlyNo supports
A tiny label with 6 mm raised letters on a thin 1.2 mm plate, made for the narrow strip above the circuit breakers in the fuse box. When a breaker trips, you see straight away which one belongs to the kitchen, the bathroom or the washing machine. Stick it on with a small piece of double-sided tape; for the other circuits, change the word in the generator, and leave any work inside the fuse box to an electrician.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 33.12 × 9.45 × 2.4 mm
- Print time
- ≈ 2 min
- Filament
- ≈ 0.6 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 33.12 × 9.45 mm, 2.4 mm thick
- Second colour: change filament at 1.2 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Door sign “Do not disturb”
Toilet door sign
14 min2 parts
House number
37 min2 parts
Mailbox sign “No junk mail”
10 min2 parts
Something wrong with this model? Report a problem