Flower pot 10 cm with saucer
3 h 36 min2 parts
Flower pot with twisted waves
3D printing2 partsBeginner-friendlyNo supports
A round flower pot with ten wide waves that turn by 40° from bottom to top, 10 cm wide at the top and 9 cm high, with a saucer. The waves look like a flower calyx and suit a cheerful houseplant. It holds about 0.39 l of soil, has a 10 mm drainage hole and stands in the saucer on six ribs above the water.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 202.99 × 97.79 × 90 mm
- Print time
- ≈ 3 h 39 min
- Filament
- ≈ 93 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print the pot standing upright as shown and the saucer flat, both without supports. For a watertight saucer use 3 walls (perimeters). PETG copes better with sun and water than PLA.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Pot: 100 mm at the top, 80 mm at the bottom, 90 mm high
- Inside: 90 mm at the top, 88 mm deep
- Holds about 0.39 l of soil
- 10 waves
- Twisted by 40°
- Drainage hole: 10 mm
- Saucer: 93.2 mm wide, 14 mm high
This model comes from the “Plant pot” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Flower pot 10 cm with saucer
Grooved flower pot with saucer
4 h 38 min2 parts
Twisted hexagonal flower pot
3 h 22 min2 parts
Mini pot for succulents
1 h 19 min2 parts
Something wrong with this model? Report a problem