Door sign “Do not disturb”
13 min2 parts
Door sign “Private”
3D printing2 partsBeginner-friendlyNo supports
A clear “Private” sign with 20 mm raised letters on a sturdy 3 mm plate with rounded corners. It marks rooms that aren't meant for guests or customers: the office at home, the staff room, a store room or the door to your flat in a shared house. Stick it on with double-sided or mounting tape; print the letters in a contrasting colour so the sign is easy to read from a distance.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 103.17 × 31.49 × 4.2 mm
- Print time
- ≈ 17 min
- Filament
- ≈ 8.8 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 103.17 × 31.49 mm, 4.2 mm thick
- Second colour: change filament at 3 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Door sign “Do not disturb”
Toilet door sign
14 min2 parts
House number
37 min2 parts
Mailbox sign “No junk mail”
10 min2 parts
Something wrong with this model? Report a problem