S-hook for kitchen rails 16 mm
11 min1 part
Cookbook stand for the kitchen
3D printing1 partBeginner-friendlyNo supports
A large stand that keeps a cookbook, a recipe folder or a tablet upright at 70° on the kitchen counter, so the recipe stays clean and in view while you cook. The slot takes books up to 30 mm thick, and the 15 mm front lip holds the pages at the bottom. At 200 mm wide and with a 150 mm backrest it supports even big baking books. It is 103 mm deep and fits a 220 mm print bed.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 200 × 102.65 × 150 mm
- Print time
- ≈ 8 h 47 min
- Filament
- ≈ 243 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. With PLA, 15 % infill and 3 walls (perimeters) it is sturdy enough; for a heavy tablet use 4 walls.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Stand: 200 mm wide, 102.6 mm deep, 150 mm high
- For devices up to 30 mm thick
- Angle: 70°
- Front lip: 15 mm
- Without cable opening
This model comes from the “Phone and tablet stand” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
S-hook for kitchen rails 16 mm
Pantry label “Flour”
6 min2 parts
Tea bag box with 2 compartments
5 h 34 min2 parts
Cutlery tray 300 × 480 mm
20 h 23 min4 parts
Something wrong with this model? Report a problem