Flower pot 10 cm with saucer
3 h 36 min2 parts
Cachepot with twisted waves
3D printing1 partBeginner-friendlyNo supports
A decorative cachepot with 24 waves that twist by 60° from bottom to top, 15 cm wide at the top and 12.5 cm high, without a drainage hole. Simply put the plant in its plastic pot from the garden centre inside: a 12 cm pot fits, as the inside is 13.9 cm wide at the top and 12.3 cm deep. Excess water collects at the bottom instead of on the windowsill.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 149.94 × 149.97 × 125 mm
- Print time
- ≈ 6 h 20 min
- Filament
- ≈ 161 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print the pot standing upright as shown and the saucer flat, both without supports. For a watertight saucer use 3 walls (perimeters). PETG copes better with sun and water than PLA.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Pot: 150 mm at the top, 125 mm at the bottom, 125 mm high
- Inside: 138.8 mm at the top, 123 mm deep
- Holds about 1.42 l of soil
- 24 waves
- Twisted by 60°
- No drainage hole
This model comes from the “Plant pot” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Flower pot 10 cm with saucer
Grooved flower pot with saucer
4 h 38 min2 parts
Twisted hexagonal flower pot
3 h 22 min2 parts
Mini pot for succulents
1 h 19 min2 parts
Something wrong with this model? Report a problem