Drawer organizer for cables and chargers
9 h 44 min2 parts
Cable label “Router”
3D printing2 partsBeginner-friendlyNo supports
A small cable label with 6 mm raised letters, a thin 1.6 mm plate and a 4 mm hole for a cable tie. Behind the desk, the TV or in the network cupboard it shows which cable belongs to which device, so you unplug the right one. Put a narrow cable tie through the hole and around the cable just behind the plug; for the other cables, change the word in the generator.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 38.46 × 12.1 × 2.8 mm
- Print time
- ≈ 2 min
- Filament
- ≈ 0.9 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 38.46 × 12.1 mm, 2.8 mm thick
- Second colour: change filament at 1.6 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Drawer organizer for cables and chargers
Charging cable holder for 3 cables
5 min1 part
Power cable clip 8 mm
6 min1 part
Clip for thick cables 14 mm
12 min1 part
Something wrong with this model? Report a problem