Round coaster with rings
41 min2 parts
Bottle coaster for wine and oil
3D printing2 partsBeginner-friendlyNo supports
A coaster with an 8 mm high rim for wine, oil or vinegar bottles, which catches drips running down the bottle before they reach the tablecloth or the shelf. Bottles up to 90 mm in diameter stand on raised rings inside. It is 100 mm across and 10.4 mm high; in two colours – change filament at 2.4 mm – the rim stands out nicely.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 100 × 100 × 10.4 mm
- Print time
- ≈ 53 min
- Filament
- ≈ 25 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. For two colours, change filament at the height shown (in the slicer: colour change at that layer), or load the 3MF and give the pattern its own colour. PLA works well; wipe the coaster with a damp cloth – it is not for the dishwasher.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 100 × 100 mm, 10.4 mm high
- Base: 2.4 mm
- Rim: 3 mm wide, 8 mm high, 94 mm inside
- Second colour: change filament at 2.4 mm height
This model comes from the “Coaster” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Round coaster with rings
Hexagonal honeycomb coaster
45 min2 parts
Square coaster with diagonal stripes
47 min2 parts
Octagonal coaster with dots
43 min2 parts
Something wrong with this model? Report a problem