Gridfinity bin 1 × 1
37 min1 part
Low Gridfinity bin 1 × 1
3D printing1 partBeginner-friendlyNo supports
A low Gridfinity bin on a single grid square, only 3 units high. Tiny parts that get lost in a deep bin stay in view here: SMD components, button cells, printer nozzles, rings or earrings. Several side by side make a neat sorting tray in a shallow drawer, and each one lifts out on its own to take to the workbench.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 41.5 × 41.5 × 24.8 mm
- Print time
- ≈ 25 min
- Filament
- ≈ 10 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print with the opening up, no supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Grid: 1 × 1 units, 3 units high
- Inside: 39.6 × 39.6 mm, 14 mm deep
This model comes from the “Bin for Gridfinity” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Gridfinity bin 1 × 1
Gridfinity bin 2 × 1
59 min1 part
Gridfinity bin 1 × 2 with label tab and scoop
1 h 16 min1 part
Gridfinity bin 2 × 2
1 h 32 min1 part
Something wrong with this model? Report a problem