Gridfinity bin 1 × 1
37 min1 part
Gridfinity bin 2 × 2
3D printing1 partBeginner-friendlyNo supports
A square Gridfinity bin over four grid squares, 6 units high with a stacking lip – the all-rounder among the bins. There is room for rolls of tape, spools of thread, a pad of sticky notes or a handful of tools, in the drawer as well as on the shelf. If you fill it with heavy things like screws or nuts, set the wall to 1.2 mm in the generator: the bin gets sturdier and loses hardly any space.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 83.5 × 83.5 × 45.8 mm
- Print time
- ≈ 1 h 32 min
- Filament
- ≈ 41 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print with the opening up, no supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Grid: 2 × 2 units, 6 units high
- Inside: 81.6 × 81.6 mm, 35 mm deep
This model comes from the “Bin for Gridfinity” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Gridfinity bin 1 × 1
Gridfinity bin 2 × 1
59 min1 part
Gridfinity bin 1 × 2 with label tab and scoop
1 h 16 min1 part
Gridfinity bin 2 × 3
2 h 5 min1 part
Something wrong with this model? Report a problem