Laser-cut cube 60 mm
Laser cutting6 parts
Toy crate for the laser cutter
Laser cutting5 partsBeginner-friendly
An open toy crate for the laser cutter, made of 4 mm plywood: 300 × 200 × 150 mm outside and 292 × 192 × 146 mm inside – room for building bricks, toy cars or soft toys. The five parts fit together with finger joints and are glued. Together they need about 605 × 510 mm of board, so check the size of your laser bed.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 300 × 200 × 150 mm
- Parts
- 5
- Material thickness
- 4 mm
Cutting settings
- Material thickness
- 4 mm
- Kerf
- 0.1 mm – Adjust it to your laser in the generator.
Worked for others:
Tip: Open the SVG or DXF in your laser software (e.g. LightBurn or xTool Creative Space). Cut lines are red and 0.1 mm thin. Cut a test corner first: if the joints are loose, raise the kerf; if they are too tight, lower it. Glue with wood glue.
Adjust it
- Outside: 300 × 200 × 150 mm
- Inside: 292 × 192 × 146 mm
- 5 parts, together 605.1 × 510.1 mm
This model comes from the “Laser box with finger joints” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Laser-cut cube 60 mm
Box for a deck of playing cards
1 h 55 min2 parts
Box for game pieces with 6 compartments
3 h 28 min2 parts
Sidewalk chalk holder for four sticks
2 h 6 min1 part
Something wrong with this model? Report a problem