Box for a deck of playing cards
1 h 55 min2 parts
Sidewalk chalk holder for four sticks
3D printing1 partBeginner-friendlyNo supports
Four cups for the house wall, the shed or the playhouse that keep chunky sidewalk chalk sorted and dry, so the next drawing on the pavement can start right away. Each cup takes sticks up to 28 mm thick, and a hole in every base lets rain water drain. Fix it with two 4 mm screws at a height children can reach. 164 × 34 × 40 mm; print it in bright colours.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 163.72 × 33.68 × 40 mm
- Print time
- ≈ 2 h 6 min
- Filament
- ≈ 53 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 163.7 mm long, 33.7 mm deep, 40 mm high
- Holders: 4 for 28 mm
- Closed ring: slide in from above
- With base, drain hole 11 mm
- Distance from wall: 0 mm
- 2 holes for screws up to 4 mm, 151.7 mm apart
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Box for a deck of playing cards
Box for game pieces with 6 compartments
3 h 28 min2 parts
Giant bolt and nut M20
45 min2 parts
Laser-cut cube 60 mm
Laser cutting6 parts
Something wrong with this model? Report a problem