Giant bolt and nut M20
45 min2 parts
Laser-cut cube 60 mm
Laser cutting6 partsBeginner-friendly
A closed cube with finger joints and 60 mm edges, cut from six square panels of 3 mm plywood or MDF. It makes a big dice for board games, a letter block or a photo cube, and it is cut and glued in no time. Engrave pips or letters in your laser software before cutting: the two panels in each row of the file are opposite faces, so put 1 and 6, 2 and 5, and 3 and 4 in one row each.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 60 × 60 × 60 mm
- Parts
- 6
- Material thickness
- 3 mm
Cutting settings
- Material thickness
- 3 mm
- Kerf
- 0.1 mm – Adjust it to your laser in the generator.
Worked for others:
Tip: Open the SVG or DXF in your laser software (e.g. LightBurn or xTool Creative Space). Cut lines are red and 0.1 mm thin. Cut a test corner first: if the joints are loose, raise the kerf; if they are too tight, lower it. Glue with wood glue.
Adjust it
- Outside: 60 × 60 × 60 mm
- Inside: 54 × 54 × 54 mm
- 6 parts, together 125.1 × 190.1 mm
This model comes from the “Laser box with finger joints” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Giant bolt and nut M20
Laser box 100 × 80 × 50 mm
Laser cutting6 parts
Laser box 200 × 150 × 100 mm
Laser cutting6 parts
Laser-cut tray 300 × 200 × 40 mm
Laser cutting5 parts
Something wrong with this model? Report a problem