Sorting insert for building bricks
10 h 8 min2 parts
Sorting tray for jigsaw pieces
3D printing1 partBeginner-friendlyNo supports
A flat tray with four compartments for sorting jigsaw pieces: edges, sky, faces, colours. Each compartment is 97.7 × 97.7 mm and 13.8 mm deep, with rounded corners so the pieces slide out easily. The tray measures 199 × 199 × 15 mm and prints in one piece on a 220 mm bed. Put it next to the puzzle and nothing gets lost under the table.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 199 × 199 × 15 mm
- Print time
- ≈ 2 h 58 min
- Filament
- ≈ 85 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print with the opening facing up, no supports needed. If the parts come out a little too wide, increase the clearance.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Organizer: 199 × 199 × 15 mm
- Each compartment inside: 97.7 × 97.7 × 13.8 mm
This model comes from the “Drawer organizer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Sorting insert for building bricks
Insert for a board game box
11 h 11 min4 parts
Box for a deck of playing cards
1 h 55 min2 parts
Box for game pieces with 6 compartments
3 h 28 min2 parts
Something wrong with this model? Report a problem